Authorized Dr. Dabber Retailer
Dr. Dabber at 1321.
Induction e-rigs, pocket rigs, cups and replacement glass. Shop the range online or pick it up at the shop on Venice Blvd.
Sourced through Dr. Dabber, so the manufacturer warranty is yours to claim.
Order online and collect at 1321 Venice Blvd. Open daily till midnight.
Orders go out on business days from the Westside of Los Angeles.
The lineup
Three rigs, one idea.
Dr. Dabber heats the cup instead of a coil. That is the whole pitch, and it is why the temperature holds and why there is no atomizer to burn out. What separates the three is size, battery and how far the temperature range goes.

Switch 2
Best for a home rig you keep for years
Grade 2 titanium chamber, omni-directional induction heat and single degree control across the full 250 to 650 range. Heat profiles save to the app. The Drop loading tool is in the box.

SwitchGO
Best for taking it with you
Roughly half the size of the Switch 2 at six inches tall. Same induction heating, same full range through the app, and USB-C pass-through so it runs while it charges.

Ghost 2
Best for a first real rig, or a second one for the bag
Five presets from 420 to 540 and the same three heat modes the flagship runs. It uses radial sidewall heating around a ceramic e-chamber rather than induction, so the chamber is a part you swap.
Side by side
Which Dr. Dabber should you buy?
If you want one answer: the Switch 2 if it lives on a table, the SwitchGO if it travels, the Ghost 2 if you are starting out or want something that disappears into a pocket.
- Best for
- A home rig, long sessions
- Size
- Full size, table top
- Heating
- Induction, titanium chamber
- Temperature
- 250 to 650, single degree
- Battery
- About 50 heat cycles
- Wear part
- Quartz or sapphire cup
- Price
- $420
- Best for
- Travel, taking it out
- Size
- Six inches tall
- Heating
- Induction
- Temperature
- 250 to 650 through the app
- Battery
- About 20 cycles, USB-C pass-through
- Wear part
- Quartz or sapphire cup
- Price
- $330
- Best for
- Starting out, everyday carry
- Size
- Pocket size
- Heating
- Radial sidewall, ceramic e-chamber
- Temperature
- 420 to 540, five presets
- Battery
- About 20 cycles
- Wear part
- Ceramic e-chamber
- Price
- $120
Why induction
The part nobody explains in the shop.
Nothing touches the heat
A magnetic field makes the chamber generate its own heat. There is no element pressed against ceramic, so nothing degrades from contact.
It holds the number
An infrared sensor reads the chamber itself rather than inferring temperature from a heater, which is why the setting does not drift halfway through a session.
The cup lifts out
Cleaning is a soak, not surgery. Pull the insert, sit it in iso, wipe the well dry. The consumable is a cup you wash, not an atomizer you throw away.
Barely visible vapor and close to pure terpene. Worth trying once even if you never come back to it.
Light vapor, sharp taste, easy pull. Where most people who care about flavor end up living.
Full extraction with vapor you can see and most of the flavor intact. If you only set one number, set this one.
Maximum vapor, faster and harsher, terpenes mostly gone. Useful for thicker material.
Temperature is only the starting point. All three devices run the same three heat modes across a draw: Descent starts hot and falls away like a banger after the torch comes off, Ascent climbs the way torching does and pulls terpenes first, and Steady holds the number flat no matter how hard you pull.
Cups, glass and parts
Replacement parts, matched to your device.
Quartz heats fast and cools fast, which suits shorter sessions and low temperature flavor pulls, and it is the cheaper cup to replace when one chips. Sapphire takes longer to come up but holds heat evenly and gives it back slowly, so a big load finishes as cleanly as it started. Most people start on quartz and buy sapphire once they know what temperature they actually live at.

Induction Cups
Quartz or sapphire inserts for the flagship chamber.

Induction Cups
14mm quartz or sapphire inserts for the portable.

Carb Cap & Glass
Replacement carb cap and replacement glass attachment.

e-Chamber
The Ghost 2 wear part. Swap it when flavor drops off.

The Drop
Heated ceramic tip calibrated not to scorch. High to drop, low to cut. Included with the Switch 2.
Venice, Los Angeles
Shop Dr. Dabber in person.
We are on Venice Blvd, a few minutes from the boardwalk and an easy run from Santa Monica, Mar Vista, Culver City and Marina del Rey. If you want to hold a Switch 2 before you commit to one, or you need a cup today rather than Thursday, come by. Every online order can be set to free local pickup at checkout.
Questions
Straight answers.
Which Dr. Dabber is best?
It depends on where it lives. The Switch 2 is the one to buy if it sits on a table, because you get the biggest chamber, single degree control and the longest battery. The SwitchGO is the same induction system shrunk down for travel. The Ghost 2 is the honest entry point and the one people buy as a second device for the bag. Prices and the full spec comparison are further up this page.
What is the difference between the Switch and the Switch 2?
The Switch 2 is the current generation and the one we carry. It runs a Grade 2 titanium chamber with omni-directional induction and an infrared sensor reading the chamber directly, single degree control from 250 to 650, app-saved heat profiles and the Drop loading tool in the box. We do not stock the original Switch.
Does 1321 carry the Dr. Dabber XS or the Boost Evo?
Not currently. What we carry is the Switch 2, the SwitchGO, the Ghost 2, the Drop, and the cups, glass and e-chambers that go with them. If you are after something outside that list, call the shop and we will tell you straight whether we can get it.
Do I ever have to buy a replacement atomizer?
Not for the induction devices. The consumable is the insert cup, and you replace it because you chipped it or because you want to move from quartz to sapphire, not because it burned out. The Ghost 2 is the exception, since its ceramic e-chamber is designed to be swapped.
How do I clean a Dr. Dabber?
Lift the insert out, soak it in isopropyl alcohol, and wipe the well with a dry swab. Never let liquid down into the induction well itself. Glass attachments clean like any other percolator. Doing the chamber while it is warm rather than hot turns it into a thirty second job.
Where can I buy Dr. Dabber in Los Angeles?
At the shop. 1321 is an authorized Dr. Dabber retailer at 1321 Venice Blvd in Venice, open daily from 11AM to midnight, which puts us within a short drive of most of the Westside. You can also order online for free local pickup or have it shipped.
Does 1321 carry Dr. Dabber replacement parts and accessories?
Yes. Switch 2 induction cups in quartz and sapphire, SwitchGO cups, SwitchGO carb caps and replacement glass, and the Ghost 2 e-chamber. The parts section above lists what each one fits so you do not order the wrong cup.
Is the warranty valid if I buy from 1321?
Yes. We are an authorized retailer, so units come through the proper channel and Dr. Dabber handles warranty claims directly. Keep your receipt and go to them first.
Keep reading
Where to go next.
Must be 21+ to purchase. Dr. Dabber is a trademark of Dr. Dabber Inc.